Chemistry, spectroscopy and analytical applications of certain chemiluminescent reactions

Chemiluminescence, the production of light from a chemical reaction, has found widespread use in analytical chemistry. Both tris (2, 2’-bipyridyl) ruthenium (II) and acidic potassium permanganate are chemiluminescence reagents that have been employed for the determination of a diverse range of analytes. This thesis encompasses some fundamental investigations into the chemistry and spectroscopy of these chemiluminescence reactions as well as extending the scope of their analytical applications. Specifically, a simple and robust capillary electrophoresis chemiluminescence detection system for the determination of codeine, O6-methylcodeine and thebaine is described, based upon the reaction of these analytes with chemically generated tris(2,2'-bipyridyl)ruthenium(III) prepared in sulfuric acid (0.05 M). The reagent solution was contained in a glass detection cell, which also held both the capillary and the cathode. The resultant chemiluminescence was monitored directly using a photomultiplier tube mounted flush against the base of the detection cell. The methodology, which incorporated a field amplification sample introduction procedure, realised detection limits (3a baseline noise) of 5 x 10~8 M for both codeine and O6-methylcodeine and 1 x 10~7 M for thebaine. The relative standard deviations of the migration times and the peak areas for the three analytes ranged from 2.2 % up to 2.5 % and 1.9 % up to 4.6 % respectively. Following minor instrumental modifications, morphine, oripavine and pseudomorphine were determined based upon their reaction with acidic potassium permanganate in the presence of sodium polyphosphate. To ensure no migration of the permanganate anion occurred, the anode was placed at the detector end whilst the electroosmotic flow was reversed by the addition of hexadimethrine bromide (0.001% m/v) to the electrolyte. The three analytes were separated counter to the electroosmotic flow via their interaction with a-cyclodextrin. The methodology realised detection limits (3 x S/N) of 2.5 x 10~7 M for both morphine and oripavine and 5 x 10~7 M for pseudomorphine. The relative standard deviations of the migration times and the peak heights for the three analytes ranged from 0.6 % up to 0.8 % and 1.5% up to 2.1 % respectively. Further improvements were made by incorporating a co-axial sheath flow detection cell. The methodology was validated by comparing the results realised using this technique with those obtained by high performance liquid chromatography (HPLC), for the determination of both morphine and oripavine in seven industrial process liquors. A complimentary capillary electrophoresis procedure with UV-absorption detection was also developed and applied to the determination of morphine, codeine, oripavine and thebaine in nine process liquors. The results were compared with those achieved using a standard HPLC method. Although over eighty papers have appeared in the literature on the analytical applications of acidic potassium permanganate chemiluminescence, little effort has been directed towards identifying the origin of the luminescence. It was found that chemiluminescence was generated during the manganese(III), manganese(IV) and manganese(VII) oxidations of sodium borohydride, sodium dithionite, sodium sulfite and hydrazine sulfate in acidic aqueous solution. From the corrected chemiluminescence spectra, the wavelengths of maximum emission were 689 ± 5 nm and 734 ± 5 nm when the reactions were performed in sodium hexametaphosphate and sodium dihydrogenorthophosphate or orthophosphoric acid environments respectively. The corrected phosphorescence spectrum of manganese(II) sulfate in a solution of sodium hexametaphosphate at 77 K, exhibited two peaks with maxima at 688 nm and 730 nm. The chemical and spectroscopic evidence presented strongly supported the postulation that the emission was an example of solution phase chemically induced phosphorescence of manganese(II). Thereby confirming earlier predictions that the chemiluminescence from acidic potassium permanganate reactions originated from an excited manganese(II) species. Additionally, these findings have had direct analytical application in that manganese(IV) was evaluated as a new reagent for chemiluminescence detection. The oxidations of twenty five organic and inorganic species, with solublised manganese(IV), were found to elicit analytically useful chemiluminescence with detection limits (3 x S/N) for Mn(II), Fe(II), morphine and codeine of 5 x 10-8 M, 2.5 x 10-7 M, 7.5 x 10-8 M and 5 x 10-8M, respectively. The corrected emission spectra from four different analytes gave wavelengths of maximum emission in the range from 733 nm up to 740 nm indicating that these chemiluminescence reactions also shared a common emitting species, excited manganese(II). Whilst several analytical problems were addressed in this thesis and answers to certain questions regarding the fundamentals of acidic potassium permanganate chemiluminescence were proposed, there are several areas that would benefit from further research. These are outlined in the final chapter of this thesis.

pH-detachable polymer brushes formed using titanium−diol coordination chemistry and living radical polymerization (RAFT)

pH-detachable poly(styrene) brushes formed on indium−tin oxide (ITO) glass substrates using metal complex chemistry and reversible addition−fragmentation chain transfer (RAFT) polymerization was described. These pH-detachable polymeric brushes were generated using both “graft-from” and “graft-to” methodologies. The methodologies involved either the surface self-assembly of catechol-functional RAFT agents (graft-from) or catechol-terminal polymer chains (graft-to) onto the ITO substrate via titanium−diol coordination. The stepwise functionalization of the ITO glass surfaces was characterized successfully using X-ray photoelectron spectroscopy (XPS) and contact angle measurement. Poly(styrene) brushes generated using the “graft-from” method were denser than those generated using the “graft-to” method, as exemplified by atom force microscopy (AFM) and quantified using cyclic voltammetry. Poly(styrene) brushes assembled using both methods could be detached easily by manipulating the pH of the brush environment. Cyclic voltammetry was utilized to calculate precisely the surface coverage of the RAFT functionality and polymeric brush density.

Interfacial chemistry and adhesion between titanium dioxide nanotube layers and titanium substrates

Interfacial chemistry and adhesion between titanium dioxide (TiO₂) nanotube layers and titanium (Ti) substrates were studied in this Article. TiO₂ nanotube layers were produced on pure Ti by anodization and annealed in air for different time durations. The adhesion of the TiO₂ nanotube layers was then investigated by Rockwell C indentation test. Results show that adhesion of TiO₂ nanotube layers improved with the extension of annealing time. This improvement in adhesion of TiO₂ nanotube layers was analyzed from the viewpoint of interfacial chemistry using energy dispersive X-ray spectrometry (EDS) and X-ray photoelectron spectroscopy (XPS). It suggests that more Ti-O bonds formed in the interface after annealing, and this led to the improved adhesion of the TiO₂ nanoube layers.

Single layer lead iodide : computational exploration of structural, electronic and optical properties, strain induced band modulation and the role of spin-orbital-coupling

Graphitic like layered materials exhibit intriguing electronic structures and thus the search for new types of two-dimensional (2D) monolayer materials is of great interest for developing novel nano-devices. By using density functional theory (DFT) method, here we for the first time investigate the structure, stability, electronic and optical properties of monolayer lead iodide (PbI2). The stability of PbI2 monolayer is first confirmed by phonon dispersion calculation. Compared to the calculation using generalized gradient approximation, screened hybrid functional and spin-orbit coupling effects can not only predicts an accurate bandgap (2.63 eV), but also the correct position of valence and conduction band edges. The biaxial strain can tune its bandgap size in a wide range from 1 eV to 3 eV, which can be understood by the strain induced uniformly change of electric field between Pb and I atomic layer. The calculated imaginary part of the dielectric function of 2D graphene/PbI2 van der Waals type hetero-structure shows significant red shift of absorption edge compared to that of a pure monolayer PbI2. Our findings highlight a new interesting 2D material with potential applications in nanoelectronics and optoelectronics.

Acetylacetonato chelated ruthenium organometallics incorporating imine-phenol function: spectroscopic, structural, electrochemical and cytotoxicity studies

The heterogeneous phase reaction of Ru(η²-RL)(PPh₃)₂(CO)Cl, 1 with lithium acetylacetonate (Liacac) afforded the complexes of the type Ru(η¹-RL)(PPh₃)₂(CO)(acac), 2 in excellent yield where η²-RL is C₆H₂O-2-CHNHC₆H₄R(p)-3-Me-5 and η¹-RL is C₆H₂OH-2-CHNC₆H₄R(p)-3-Me-5 and R is H, Me, Cl. The chelation of acac is attended with the cleavage of Ru-O and Ru-Cl bonds and iminium-phenolato → imine-phenol prototropic shift. A sterically controlled change in rotational conformation is involved in the 1 → 2 conversion. The conversion is irreversible and the type 2 species are thermodynamically more stable than the carboxylate, nitrite and nitrate complexes of 1. The crystal structures of Ru(η¹-MeL)(PPh₃)₂(CO)(acac), 2(Me) and Ru(η¹-ClL)(PPh₃)₂(CO)(acac), 2(Cl) are reported. Spectral (UV-Vis, IR, ¹H NMR) and electrochemical data of the complexes are also reported. The electronic structure and the absorption spectra of the complexes are scrutinized by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) analyses. The complexes were also screened in vitro for their antiproliferative properties against the MCF-7 breast cancer cell lines by using the MTT assay. Flow cytometric analysis showed that the complexes arrested the cell cycle in the sub G0 phase.

Structural effects and spillovers in HSIF, HSI and S & P500 volatility

We adopt a BEKK-GARCH framework and employ a systematic approach to jointly examine structural breaks in the Hong Kong cash index and index futures volatility and volatility spillovers from the S&P 500 cash and futures. Multiple switching dummy variables are included in the variance equations to test for any structural changes in the autoregressive volatility structure due to the events that have taken place in the Hong Kong market. Abolishment of the up-tick rule, increase of initial margins and electronic trading of the Hang Seng Index Futures (HSIF) are found to have significant impact when US market spillovers are excluded from a restricted model. Volatility spillovers from the US market are found to have a significant impact and account for some mis-specification in the restricted model.

Regulatory change, structural breaks, and transmission effects in HSIF and HSI volatility

A systematic BEKK-GARCH model with multiple switch points in the variance equations captures the structural changes that have taken place in the Hong Kong markets. Abolishment of the uptick rule in the Hong Kong stock market, increase of initial margins, and electronic trading of Hang Seng Index Futures are found to have significant impacts. These changes affect the volatility structure of the HSI and HSIF and hence their lead-lag relationship. The multivariate GARCH model with three specific switching points is found to be superior to any other combination of up to six separate switch points.

Structural adjustment and change in the Australian life insurance industry post demutualization

Deregulation of financial markets has been an important platform for government policy in recent times. It has been a catalyst in the expansion of financial sector. The experience of Australian life insurers during this period represents an interesting case study into the impact of regulatory transition. The lifting of restrictions changed the institutional environment within which life insurers operated. In doing so it precipitated changes in strategies and organizational structures of these financial intermediaries. An information cost framework is used to analyse the consequences of deregulation and its implications for the Australian life insurance industry in emerging global financial markets.

Examining structural breaks and growth rates in international health expenditures

Over the last decade, there has been a growing interest in examining health expenditures. In this paper, we study the behaviour of health expenditures in the G3 countries (USA, the UK, and Japan) and three European countries (the UK, Switzerland and Spain) over the period 1960–2000 from a different perspective, in that we examine: (1) whether there is a common structural break in health expenditures across the G3 and European countries; (2) whether structural breaks have slowed down health expenditure growth rates in these countries or vice versa. Our main findings are that: (1) health expenditures share a common break in both bivariate and trivariate cases, and structural breaks and break intervals suggest that either one or a combination of events (second oil price shock, the 1987 stock market crash and/or recessions) have contributed to the commonality of break in health expenditures in the G3, while the oil price shocks have been instrumental in the commonality of breaks for the European countries; (2) except for the UK, structural breaks have slowed down growth rates in health expenditures for the USA, Japan, Switzerland and Spain.

Chemistry and health of olive oil phenolics

The Mediterranean diet is associated with a lower incidence of atherosclerosis, cardiovascular disease, and certain types of cancer. The apparent health benefits have been partially attributed to the dietary consumption of virgin olive oil by Mediterranean populations. Most recent interest has focused on the biologically active phenolic compounds naturally present in virgin olive oils. Studies (human, animal, in vivo and in vitro) have shown that olive oil phenolics have positive effects on certain physiological parameters, such as plasma lipoproteins, oxidative damage, inflammatory markers, platelet and cellular function, and antimicrobial activity. Presumably, regular dietary consumption of virgin olive oil containing phenolic compounds manifests in health benefits associated with a Mediterranean diet. This paper summarizes current knowledge on the physiological effects of olive oil phenolics. Moreover, a number of factors have the ability to affect phenolic concentrations in virgin olive oil, so it is of great importance to understand these factors in order to preserve the essential health promoting benefits of olive oil phenolic compounds.

Structural breaks and unit roots in Australian macroeconomic time series

We examine the unit root properties of 16 Australian macroeconomic time series using monthly data spanning the period 1960–2004. In addition to the standard Augmented Dickey Fuller (ADF) test, we implement one- and two-break endogenous structural break ADF-type unit root tests as well as one- and two-break Lagrange multiplier (LM) unit root tests. While the ADF test provides relatively little evidence against the unit root null hypothesis, once we allow for structural breaks we are able to reject the unit root null for just under half of the variables at the 10% level or better.

Applications and fundamental understanding of selected analytically important chemiluminescence reactions

This thesis encompasses a series of investigations into the fundamental chemistry and spectroscopy of chemiluminescence (chemical reactions that produce light). This new knowledge enabled the development of innovative analytical methodologies for rapid chemical measurements in forensic science, industrial process monitoring and clinical diagnostics.